Skip to main content

Lasermach LFWW-Series: WOBBLE-3

The killer of electric welding and argon arc welding

Advantages of FIBER LASER welding

Short cycle times, high welding speed

Precise and high quality parts

Flexible integration and production

Low thermal deformation

Contact-free processing

Welding without adding material

No flame = NO fume

LOW-COST

WOBBLE-3: We offer best of both worlds in ONE machine!

Two Classes Of Fiber Laser Welding For Different Product Design Needs In ONE Machine

Autogenous Welding: 

  1. Materials are joined without the addition of extra materials which requires the highest level of fixturing and joint preparation. Since no material is added, it is necessary for the materials to be welded to remain in intimate contact during the welding process. Any significant separation of the materials can result in an unacceptable weld profile or complete failure of the welded joint.
  2. Fixturing to ensure consistent fit-up of the weld joint is a key to successful fiber laser welding. An important benefit of fiber laser is welded joints with exceptional cosmetic appearance. In some cases, these welds are almost perfectly blended with the surrounding material. Depending on the fixturing and joint fit-up, some welds may have small amounts of concavity (which may not be acceptable for product designs that require fatigue properties similar to those of the base material) or convexity.

Additive Welding:

Material is added to the weld joint usually in the form of metallic wire or powder. Three reasons for adding material to the weld are:

  1. Joint fit-up: By adding extra material, the joint becomes more tolerant to joint mismatch. Acceptable welds may be produced from joints with less than perfect fit-up.
  2. Weld geometry: Addition of filler metal is used to control the shape and size of the weld. Maintaining a crown (convex surface of the weld) creates a reinforcement which is important for joints requiring mechanical strength and fatigue life in the overall product’s design performance.
  3. Dissimilar metals: Filler metal is added to facilitate welding of dissimilar metals and alloys which are otherwise metallurgically incompatible.

Laser welding provides an efficient and stable process due to its high precision and fast production rate which has many applications in the electronics and automotive industry.

Traditionally, laser welding is done with a fixed welding head with a higher power laser having lower beam quality to give acceptable weld widths as single mode beams are too sharp leading to very narrow weld profiles.

In contrast wobble welding (or oscillation welding) is where a high beam quality laser is used with a galvo scan-head to rapidly oscillate the focal spot.

This method of welding enables much easier control of weld parameters such as weld width and depth of penetration which can lead to a more efficient welding process.

Peoples Safety, Peoples Health, Peoples Workload

WHERE do you want to work?

We don't talk about this very important subjects,

 we improve them all with our WOBBLE-3-Plus for your team!

Simply look to the pictures and make your own conclusions!! 

 

Where does your team want to stand to work?

 

We hope you see some differences that can interest you!!

If so, do not hesitate to contact us!!

 

Click Here to go to our special site on Handheld fiber lasers

Click here to go to detailed information on our Handheld Fiber Laser Machines

WOBBLE-3: Affordable high Quality Handheld Fiber Laser Welding Machines