Skip to main content

Profimach Pro Steel® Series

Biggest Range of quality but affordable Deburring and finishing machines

This is the Profimach® Steel Sander Deburring Grinding Line

Pro Steel® Series

The fastest solution in deburring, deslagging, finishing, grinding and edge rounding

Easy to operate, short set up times

Flexible in finish, roughness and rounding

Lowest price per product guaranteed

Added product value by high and constant finish quality

Affordable Quality Machines

Pro Steel® Series: the optimal solution for mechanical deburring, deslagging, grinding, finishing and edge rounding.

Affordable Quality Machines with Two Year Warranty

PRO Steel Series : Code key = P-x-S-y-z-000-w

How to read the machine types?

Code P-x-S-y-z-000-w component unit
x   Digit between P-S
  2 Two sides simultaneously up and down deburring
     
y   First digit after PS (Profimach Sander)
  - Automatic operation
  M Manual operation
     
z   codes placed in sequence of machining
  2-3-4-5-6 Number BEFORE letter is the quantity of the letter following
  B Brush full width
  C Chain Belt transversal
  D Disk brush vertical
  G Gyro or planetary barrel brush or fladder type
  R Roller- Contact roller with full width abrasive belt
  T Transversal Small Belt
     
OOO   Width of working surface in mm
     
w   at the end after width value
  W Wet working
  II Second Generation
  III Third Generation
  - Dry working

Deburring machines and wide belt grinding machines of the PRO Steel® Series for deburring, precision grinding and edge rounding with the highest quality and most beautiful finish.

Nobody offers a wider variety of solutions at a more affordable price than Profimach® .

Our metal grinding machines are built with your needs in mind.
We are fully aware that different applications require different approaches and nobody offers a wider variety of solutions than us at the most affordable prices.
To satisfy your needs it is important that you find the right machine: including the number of heads, type of heads, wet-vs-dry, abrasive selection, etc. 

PRO Steel® Series

Specific Machining Application

PRO Steel® Manual Series

PRO Steel® Manual

PSDM-Manual Serie

Versatile starter model and the cost saving alternative for manual deburring, edge rounding and/or finishing of metal.

PRO Steel® Manual Double abrasive belt stroke sander

PSGM-Manual Double abrasive belt stroke sander

PRO Steel® Versatile Series

Based on Gyroscopic Planetary Rotating Barrel Brushes

PRO Steel® Versatile

PSP-Versatile Series

High efficiency and cost effective deburring, edge rounding

Focused on Deburring

Planetary abrasive Barrels

Width: 800 / 1000/1300mm

PRO Steel® Versatile PLUS

PSGP-Versatile PLUS Series

High efficiency and cost effective deburring, edge rounding, and surface finishing machine

Focused on Deburring

Wide abrasive belt + planetary abrasive Barrels

Width: 800 / 1000mm

PRO Steel® Flexy Series

Based on Vertical rotating Disks with brushes, hammers and abrasive

PRO Steel® FLEXY

PSD-FLEXY Series

PRO Steel® SLAG

PSDGB-Deslag Series

Solution for efficient deslagging, deburring, surface smoothening and edge rounding on Medium-Thick parts

Focussed on Oxy-feul, Plasma or high power Laser cutting

Zig-zag Patterned Hammer de-slagging Disk + Abrasive Belt + horizontal Crossbelt
Width:  1000mm

PRO Steel® SLAG-HD

PSDDB-Deslag Heavy Duty Series

Solution for very heavy deslagging and edge rounding on Medium-Thick parts

Focussed on Oxy-feul, Plasma or high power Laser cutting

patterned Hammer type de-slagging for very heavy slags flash

2 x Zig-zag Patterned Hammer de-slagging Disk + horizontal Crossbelt
 

Width:  1000mm

PRO Steel® Laser

PSGB-Laser Series

Laser Cutting Parts

Deburring and Edge rounding Machine.
Focused on contours and edges only.

Thin transversal abrasive belt + Top deburring block belt

Width: 1000mm

PRO Steel® Surface-D

PSG-Surface Series Dry

Solution for fine finish on metal parts surface and deburring vertical burrs

Focussed on fine finish
Wide abrasive Belt - DRY use


Width:  200/600/1000/1300mm

PRO Steel® Surface-W

PSG-Surface Series Wet

Solution for fine finish on metal parts surface and deburring vertical burrs

Focussed on fine finish of Stainless steel, aluminium, magnesium, titanium,..
Wide abrasive Belt - WET use


Width:  200/600/1000/1300mm

PRO Steel® Surface PLUS

PSG+D-Surface Series

Surface sanding, finishing, deburring, and edge rounding machine 

 Best suitable for surface sanding and finishing of punching, shearing, laser cutting parts, as well as deburring, edge rounding

PRO Steel® Surface PRO

PSG+DB-Surface PRO Series

Best suitable for wet operation deburring, edge rounding, as well as surface sanding and finishing of punching, shearing, laser cutting parts.

PRO Steel® Two-Side-One-Pass

PSGB-Two-Side-One-Pass Series

Solution for two-side-one-pass deburring and edge rounding for metal parts

Focussed on two side deburring and edge rounding

Wide abrasive Belt + Top and Bottom Deburring Block Belt


Width: 1280mm

Reliable deburring, deslagging, surface finishing, oxide and rust removal and edge rounding.

Profimach® PRO Steel® Line offers machines for the deburring, edge rounding, deslagging, surface finishing, oxide and rust removal of thin and medium  thick  sheet- and plate metal parts after laser cutting, punching, blanking, plasma cutting, and oxy cutting. Depending on the final requirements, various methods of deburring technologies can be used. The geometry, number of pieces and part dimensions, also have an influence on the machine configuration. The goal is to always achieve consistent, high quality results for deburring and edge rounding of your punched and laser-cut parts.

Reliable deburring, deslagging, surface finishing, oxide and rust removal, precision calibrated grinding and edge rounding.

Processes available

Profimach® PRO Steel® Line offers machines for the deburring, edge rounding, deslagging, surface finishing, oxide and rust removal of thin and medium  thick  sheet- and plate metal parts after laser cutting, punching, blanking, plasma cutting, and oxy cutting. Depending on the final requirements, various methods of deburring technologies can be used. The geometry, number of pieces and part dimensions, also have an influence on the machine configuration. The goal is to always achieve consistent, high quality results for deburring and edge rounding of your punched and laser-cut parts.

Deslagging

In the plasma and flame cutting, the edge of the workpiece will produce slag and flash, and this can be quickly cleaned with very abrasive material or with even heavy slag removal hammers. This equipment can maintain the original dimensional accuracy unaffected and achieve a high quality uniform micro chamfering effect.

Deburring

The burr can vary when punching, stamping, fine blanking or laser cutting your materials. Burrs created via laser cutting, fine blanking, stamping and punching adhere to the material in various strengths. Therefore finding a comprehensive deburring solution is crucial.

Deburring refers to the process of smoothing the rough edges of a metal object or component. To some, a part is considered deburred when its vertical burr is removed. To others, a part isn’t fully deburred until it has a radius on each edge.

Series Recommendations

With thousands of machines in service and decades of experience, we can design an optimized system that will meet and exceed YOUR standards. Our deburring products include:

PRO Steel® Versatile - PSGB Series: These machines can be equipped with abrasive belts and rotary discs to eliminate vertical and lateral burrs simultaneously, gently rounding the edges of the part in the process. Ideal for deburring and finishing small metal parts.

The Rotary Brush: A multi-directional brush machine that uniformly deburrs and finishes the edges of metal parts in a single pass. It’s also worth noting that this process is completely harmless to surface coatings (such as cladding, zinc or laser film). Ideal for deburring the edges of laser-cut, punched or machined parts.

Manual Grinder: A versatile machine with a rotatable head to swap between heavy grinding and edge rounding/deburring. Ideal for metalwork projects that require both deburring and grinding.

View All Models

Are you looking for the most beautiful and best rounding of metal?

A radius is created on the edge of the metal during edge rounding of metal products. This ensures that the sharpness of the edge is removed and it is given a uniform rounding. We offer perfection in edge rounding with a radius of up to two mm in a single pass. 

Edge rounding

A good edge rounding result is characterized by removing the sharpness on the edges of your laser-cut or punched materials. This prevents injuries that may be caused by handling the material, while simultaneously improving downstream processing. Furthermore, a radius at the edge of the materials also improves paint adhesion.

Profimach offers a wide range of deburring machines that also can remove your laser oxide. Our OEm factory developed in the beginning of 2015 a new brush to remove the laser oxide skin from laser-cut steel. This brush is to be used in the models with standard Rotary brush machines combining the excellent edge rounding and deburring results of the machine with the required oxide skin removal both from the interior as well as exterior contours ot the product.

Oxide removal

If you are cutting via a CO2-laser or Fiber Laser with oxygen, we have the solution that removes any oxide layers along the cutting edge of the material.

Rust removal

If you have rusty surfaces, we have the solution that removes any oxide layers along the surface of the material.

Surface finish

Punched, fine blanking, stamped and laser-cut parts often require high demands on the surface. A beautiful surface is a pleasant side effect of the deburring process. In some cases, a specific type of surface finish could be necessary.

Calibration | Precision Grinding

Grinding with the express goal of removing material and decreasing material variation. This process removes the exterior oxide layer/skin and grinds the material much like a surface grinder – only using a wide belt abrasive.

Pro Steel® Deburring Applications

Individualised and Modular

The requirements of industry and craftsmanship are extremely diverse. Different punched or cut components and materials require increasingly specialised machining procedures. At Profimach we devote ourselves to the changing requirements for deburring, rounding and surface grinding of metals and provide suitable grinding technologies as a sensible and efficient solution. As our customer you will find the best solution for your requirements.

Our metal grinding machines are built with your needs in mind. Profimach has the solutions for customers who require a machine that can deburr, precision grind, round the edges with the highest quality and most beautiful finish. This is applicable to a variety of different kinds of metal, such as copper, aluminum, stainless steel and mild steel. We know different applications require different approaches, and nobody offers a wider variety of solutions at a more affordable price than Profimach.

According to today's standards, parts cut from thin sheets are not complete after just the cutting process. Increasingly parts are required to be free of burrs to prevent injuries, be provided with high-quality coating and have a perfect surface. Profimach PRO Steel Series solves this challenge with a series of different grinding, edging and deburring technologies which can easily be combined with each other.

Parts cut from heavy plates make special demands of grinding-deburring technology. Often the thickness of these plates deviates significantly and due to the heat applied during the cutting process they are distorted in addition. On top of all that, during plasma, oxy or heavy laser cutting, troublesome scales may form on the cutting surface. In these cases PRO Steel Series' is the ideal and perfect grinding solution. The planetary head and the multi-rotation brush system and unique hammering system are then used for subsequent deslagging, edge breaking and radius-like rounding.

Perfectly processed, flawless coated sheets are the main prerequisite for high efficiency. With the PRO Steel PSGDD, a special deburring machine for coated sheets, Profimach has mastered the challenge of deburring sheets that are already coated. The distinctive feature of this machine: A dressing unit especially designed for this purpose prepares the grinding belt for the application. Handling the unit is as simple as can be; the belt need only be inserted in the machine, the automatic mode takes care of the rest. The result is perfect deburring without damage to the surface.

Fine-blanking parts, particularly for the automotive industry, require absolutely flawless development and machining. Even slight soiling is enough to turn high-quality parts into rejects. To prevent this, perfect deburring and grinding is a crucial prerequisite. The PRO Steel  xxx-Series is a wet deburring machine especially for fine-blanking parts requiring strong, even edge rounding at a high throughput speed. Profimach grinding technology combined with Profimach cleaning and dedusting machines achieve impressive results through perfect deburring, rounding and surface grinding, especially for parts with a heavy oil film.

A perfect surface finish can give metal its very own special lustre and warmth. However, the creation of brushing and grinding patterns on high-quality metal sheets is a science in itself. With its PRO Steel range, Profimach has developed a machine that creates perfect grinding patterns that leave nothing to be desired. If necessary, the machine even works fully automatically.

The patented Profimach technology in particular creates perfectly ground metal surfaces free of chatter marks. This lets you create diverse grinding patterns with an easily adjustable line length. Whether short line, long line or duplo finish – the number of variations is virtually unlimited.

Powerful, versatile and single- or double-sided.

At Profimach we develop, build and sell

Affordable Quality finishing Machines for

the deburring, precision grinding, de-slagging, surface finish, calibraring, oxide removal, rust removal and edge rounding of

metal components.