Profigrind PGT-DG Series are economical and efficient drill grinders with different functions developed for different user groups. Quality and efficiency are first criteria.
The Profigrind PG-DG-Series Drill Point Grinder are the ideal machine for sharpening large diameter bits from :
3 to 60mm (PGT-60DG)
4 to 80mm (PGT-80DG)
5 to 100 mm (PGT-100DG)
The machines easily handles two flute, three flute and four flute drill bits.
Variable included point angels are readily obtained and variable clearance or lip relief angles can be dialed in.
The geometry that is best suited for your manufacturing procedures can be added to your drills easily and quickly.
A revolving chuck and oscillating grinding wheel spindle are coordinated with a direct gear positive drive.
All of the movements involved with sharpening are automatic.
Workhead base is made of high strength aluminum alloy with precision boring and milling processing.
Spindle is adopted S.K.F. bearing steel, with high precision linear rotating bearing and less frictional resistance; the roundness can reach to 0.005 mm.
Both ends of the grinding wheel Mandrels is supported by precision bearings, the transmission between Mandrels and Motor is by the rubber coupling. The Mandrels has high stability and long usage, grinding wheel has balancing block for smooth operation.
The heavy duty compound slides and one pieces case based provide extra rigidity and minimize vibration.
Spindle and six-jaw chuck have lubrication device to ensure accuracy and usage life.
Simple operation and high accuracy.
Simple operates without special operation skill.
Rotation the hand wheel, six-jaw chuck will automatically do rotation; back and forth movement, and oscillation movement, three actions simultaneously to create the arc of front end of the drill.
This machine is designed to focus on the practicality and efficiency. For variety of sizes and different shapes of the drill, operator can set completed in very short time.
To clamp the drill in the six-jaw chuck, turn the hand wheel to grind both sides of the drill edge. Both sides of drill edge and angel are completely equal without eccentric. After the accomplished of drill grinding, then can do drill web thinning without removing the drill from the chuck to ensure the accuracy of the center and reducing the cut resistance.
AllModels can produce the popular double angle point which consists of automatic self-centering, generated helical and corner bevel point grinds. The operator can choose any of these three points. There is no costly setup to grind drills, no cam changes or grinding wheel changes for different type points. Closer hole tolerance, better wall finish, burr-free holes during the drill break through will be realized along with longer lasting drills because of the variable clearance and adjustable point angles for different materials. Spade drills can be ground in their own holder which gives much closer tolerances compared to conventional methods.
|Clearance angle of drill||0º-18º||0º-18º||0º-18º|
|Motor||0.75kW 220V||0.75kW 220V||0.75kW 220V|
|Main Grinding Wheel||180mmx50mmx31.75mm||180mmx50mmx31.75mm||180mmx50mmx31.75mm|
|grinding the end of end mills||2,3,4,6,12 flute||2,3,4,6,12 flute||2,3,4,6,12 flute|
|Net weight||310 kg||360 kg||365kg|
- One 6 jaw self-centering chuck.
- One grinding wheel (recessed one side)
- One "dish" grinding wheel for point thinning.
- Grinding wheel flange and balancing weight.
- Two grinding wheel diamond dressers (one angle dresser and one straight).
- No. 1,2,3,4 Morse Taper sleeve for PG-52DG
- No. 2,3,4,5,6 M.T Sleeve forPG-80DG
- Cam No.4 for point angle (40º-180º)
- Cam No.6 for step drill
- Cam No.8 for 4 flute taps or reamers
- A.C. motor.
- Tools for general use.
- Service/instruction manual.